• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this instance, you will need to locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

If you plan to try to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor, where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your property until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may be interested in a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sliding. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows so you can access the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window repairs and check for fit. If you are happy with the fit of your window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is often caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and do a test fitting. The corners of the sash must align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and floors that are wet. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up might need to be removed before a fresh layer can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze, it may be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or due to a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to give suggestions.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. First, the hinges due to wear and tear could become misaligned. This can cause a gap to form where the sash joins the frame. If they are beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window and can also become misaligned, again it's possible to give them a good clean, but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. However, it is important to realize that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than fix them. If you have any problems with your upvc window it is recommended to speak with an expert as soon as possible.