• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor where they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is large, you may be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sliding. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could also be due to the handle mechanism wears out. Fortunately, it's easy to fix the loose uPVC window handle yourself. You'll first need to close the window and then perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if get up each morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be completed by any DIY expert. Based on the severity of the issue the caulking used previously may need to be removed before a new layer can be applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be hinges at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It is very easy to change the hinges on a window, but it's easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrows on each hinge. This shows which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of inadequate installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to provide advice.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc window repair can be caused by a few different factors. The hinges can also become unbalanced due to wear, which can cause gaps where the sash and frame meet. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it's possible to give them a clean but in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than fix them. So, if you're experiencing problems with your upvc windows, it is best to seek professional assistance immediately.