• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning, and stops thieves from driving it with original keys. Our latest immobiliser is connected to the CAN data network of your vehicle and a unique pin must be entered to start the engine.

Ghost, unlike trackers, does not emit radio frequency signals and can't be detected by diagnostic tools. It does not have any LED indicators or buttons to signal its presence in your van or car.

Anti-key Cloning

The Ghost immobiliser was created to combat key cloning. This device connects to the CAN data network of your vehicle and creates a unique pin code sequence that is activated by pressing the buttons from the factory on your dashboard as well as the steering wheel. This stops the criminal from being able to start your vehicle. If the wrong PIN code is entered, your engine cannot be started and it will be impossible for them to drive away with your pride and joy.

ghost car immobiliser immobilisers use a new technology which is extremely difficult for thieves to defeat. The ghost immobiliser unlike physical deterrents, like wheel locks or steering locks that are able to be cut, is a discreet electronic device. It isn't recognized by thieves as it doesn't emit radio signals and operates silently.

The new generation of immobiliser is capable of protecting your vehicle from a variety of threats, including cloned keys, key-hacking and even relay attacks. It also has the ability to stop the thief from adding a new key or replacing your ECU by ensuring that it does not allow the car to start without entering the correct PIN number first.

Unlike other immobilisers, the ghost immobiliser 2 does NOT require any additional key fobs or remotes to operate. It can be turned off by the driver's smartphone with a simple application. This is a great option when you need to give your car away for valet parking, or maintenance without key fobs.

The autowatch ghost immobiliser fitting Ghost-II is the latest version of our groundbreaking ghost immobiliser. It was designed to make it as simple and easy to use, while still being as secure as it can be. This is achieved by connecting the Ghost-II into the vehicle's data network CAN, which means there are no wires to hide or be easily identified. It also comes with an inbuilt feature that allows you to disarm the ghost immobiliser installers near me-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest method employed by professional car thieves to steal vehicles. Thieves have access to your vehicle's OBD using a laptop, a mobile application, and cables that are available on the internet for less than PS50. Once they have access, they can do whatever they want, from resetting your vehicle's fault codes to tuning your car, or even getting it stolen in under a minute.

It can prevent your car from being stolen by requiring a specific PIN sequence to be entered in conjunction with your key fob before you can start the engine or drive away. It does this by communicating with the vehicle's ECU (Engine Control Unit) on the CAN Data circuit and is totally undetectable to any code grabbing or RF scanning technology. It also has a Service/Valet Mode that allows your vehicle to start with no PIN code.

To utilize an OBD hacking device, you'll require an operating system that is capable of reading the OBD protocol. These can be bought for less than PS100 on ebay or Amazon. You'll also require cables with OBD pins which are connected to the CAN bus, these can be found on Amazon/Ebay for about PS50. The cable has to be connected to the wiring harness of your car, for example the radio wiring harness.

Once the hacker gains access to the OBD port on your vehicle, they can send diagnostics to the system at a high baud rate, which will crash the car's CAN and stop the system from functioning. This can cause the engine to stall or even lock doors, and even the brakes to engage.

No need for additional remotes or key fobs

An immobiliser for your car is a excellent piece of anti-theft technology that is used by billions of modern cars around the world. Using engine ECU software to stop cars from beginning if a false transponder signal is transmitted to it an aftermarket immobiliser can be an excellent way to safeguard your vehicle.

However, it can be easy for a thief to get around an immobiliser system if they have access to the code that allows them to disable it. The battery in most key fobs is easily removed by removing it which means that a burglar could employ a simple tool remove the immobiliser's internal circuit board and replace it with a blank. Then, they'll be capable of starting your vehicle.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates with vehicle's engine ECU (Engine Control Unit) through a discreet quiet data circuit in CAN that is not detectable by diagnostic tools, such as the ones used by high-tech thieves. It doesn't come with a traditional keyfob that has an LED indicator, so it's not visible.

You may have to turn off Autowatch's ghost immobiliser installer 2 automatic protection at certain times like during valet parking or during a service. The ghost CAN immobiliser comes with a specific mode to do this, referred to "Service Mode which can be activated with just a push of the button on your smartphone. The car can still be operated, but the maximum speed is limited to 36 mph.

If you'd like more information about the TASSA certified ghost immobiliser, call us today to book a demonstration at our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost is a next generation device that can secure your vehicle without cutting wires or putting in aftermarket key fobs. It is directly connected to the vehicle's CAN data network. A personalised PIN is programmed using buttons on the steering wheel and dash. The device does not emit RF signals, which means it is unable to be manipulated. This makes it difficult to be detected using sophisticated RF scanning and code grabbing techniques used by modern thieves.

The PIN code sequence can be altered anytime you want to block prior drivers, and it even has an override option in the event of lost sequences. When installing the installer will show how to do this. The system comes with a valet-mode feature that allows you to temporarily disable pin input sequences so that the garage or mechanic can work on the vehicle without knowing the code. This is ideal for customers who want to give their vehicle for valet parking or service, but don't want divulge the PIN sequence.

Contrary to Thatcham products that require additional key-fobs in order to operate, ghost 2 Immobiliser installation near me is a discreet system which takes advantage of the buttons in your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered through the app on your smartphone, which means there are no additional LEDs displayed and your vehicle is safe from the risk of being blocked by hackers or other technology.

Every vehicle is tested

Ghost immobilisers, unlike key fobs which require pressing buttons, is discretely installed under the dash or on the steering wheel. It is not obvious that it's there. The device is connected to the CAN network of your vehicle, and a PIN code can be programmed by using the buttons on your car. The system won't allow your car to start until this code is entered. This means that thieves cannot copy the keys to your car or access the OBD to hack into it.

ghost tracker installation is a great option for all vehicles, including electric cars motorhomes, vans, and bicycles. It's also incredibly versatile and can be programmed to turn off in various situations. For instance, it can be programmed to go into Valet mode when the vehicle is being transported to a valet parking or a service provider. This permits you to drive within a 30mph speed limit and the ghost immobiliser will activate itself when your vehicle returns to your home.

Another fantastic feature is that the device can be reset to the personalized PIN at any time. This is helpful in the event that you forget your code or the device becomes inoperable and is just as good as new.

The device is unnoticed by anyone who doesn't even know what it is. It does this by analyzing the buttons on your dashboard and steering wheel, and using the data it sends to identify the button that was pressed. This makes it a safe and reliable security solution that cannot be compromised by RF scanning, jamming or door lock pick sets.