• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If windows with double glazed window repairs near me panes are held together by internal beading, it is harder to remove and replace the old panes. In this situation, you will need to locate some plastic spacers to help the new pane to fit correctly into the frame of the window.

If you're planning to attempt to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window repairs. However, with time, they can suffer from a variety of issues like sagging. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to access the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. The first step is to close your window and do a test fit. The corner joints of the sash should align with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to take action if you wake up every morning to find a smoky wall and floors that are wet. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal than the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze It could be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. The process of replacing a hinge on a window repair is an easy process but it can be easier to do with someone else to assist in holding the frame in place.

Make sure that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. This can often be resolved by sending us a photograph on our website. We will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges, also due to wear and tear could become misaligned. This will cause an opening to appear where the sash joins the frame. They can be repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to have them aligned or replaced. In addition, the interlock could also become unbalanced. This happens on the hinge's side and might require to be cleaned. In some instances it might be necessary to replace these.

These seals can wear down or become damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be put on the windowsill on top. These will help to keep cold air out and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as you can.