• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable possession from theft. This system is discreet & does not require additional key fobs to operate.

The device makes use of buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be altered up to 20 times. This will then allow your vehicle to begin.

Simple PIN Code Change Process

Many owners are upgrading their security due to the rising number of vehicle thefts. There are many different types of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking device can assist you in locating your vehicle if it's stolen however, it won't prevent the crime. Immobilisers, on the contrary, do exactly what they claim on the tin: they shut down the motor of your car so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your vehicle.

The lamborghini ghost installer device makes use of the buttons on your car to generate a unique sequence that must be entered in order for the engine to begin. This can be done by using the heater, window or indicator stalk buttons. Additionally option, there is an app on mobile that can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is an excellent option for those who want to offer your car to valet parking or servicing. The immobiliser will remain in operation.

The Ghost is a unique and ingenious device that works in conjunction with the buttons of your car rather than as a separate unit. This means that it's not only a highly effective security measure against theft from your vehicle but also a transferable device onto any other vehicles you may have, making it more investment-wise than a traditional steering wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that protects your vehicle from key hacking and cloning. It also blocks ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU via the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to make sure it works with all vehicles. It is also resistant to jamming devices which is a common technique used by car thieves to circumvent the immobilisers in place.

The advantage of using CAN data is that it operates silently compared to traditional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques, nor can it be recognized by conventional diagnostic tools. The autowatch ghost installers birmingham - ramirez-goldman-2.blogbright.net, Ghost doesn't use LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, the centre console, or doors, to create a unique disarming sequence. You can even create a sequence that is as long as 20 presses for added security. The iPhone app permits a single, authorised connection, with a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also stops car thieves from using an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only start only if a valid PIN has been entered. It can also be put into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) to allow you to transfer your vehicle to a valet service or to be serviced without needing to enter a PIN.

Every vehicle is tested

The autowatch ghost 2 immobiliser Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts signals to stop your car from starting normally until you enter a specific code. The system can be activated and deactivated using your own smartphone app without the need for additional wires.

The factory-installed immobilisers function by using a transponder that is integrated into the key. It transmits a message to the ECU. If the correct code is transmitted the car will start however if the transponder is replaced with one from another vehicle the immobiliser won't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by a South African company at the top of security systems for vehicles technology. It shields your car from hacking, key cloning and even key theft. The only way that a burglar could steal your car is by physically towing it away, and even then they would not be capable of driving it.

Ghost uses the buttons in your car, such as the indicator stalk, steering wheel and door panels to create an unique PIN code that is changeable that must be entered prior to you can drive. This is done without any extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Ghost is harder to remove than car alarms, which require disarming with a series of buttons. This makes it a fantastic complement to an GPS tracking device which can be used to track your vehicle after it's been stolen.

Emergency PIN code override

You don't need to go far on social media sites to find stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. This includes key-cloning and hacking devices that allow the vehicle to start without the original key fobs.

Our Ghost immobiliser combats this issue and offers an additional layer of protection to stop your vehicle from being taken when it is targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel and the centre console. This unique PIN is entered in conjunction with the original key fob to stop the engine from beginning. The unique PIN for override can be found on the black card that you will receive following installation and is easy to remember because there aren't any LEDs.

The device is hidden within the vehicle's wires and doesn't emit any radio signals, so it can't be recognized by thieves using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to an electronic device for tracking.

Contrary to other security systems which rely on a relay in the engine bays, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block the vehicle completely by sending an electronic block to the ECU and engine.

These systems can also be connected to a separate analogue alarm, immobiliser or tracker. This must be specified prior to installation. They are also compatible with valet and service modes, and are a great alternative to a tracking device if you take your car into the dealer for an electrical issue.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles being stolen from owners without keys. It's now easier than ever before to steal your pride and joy due to the availability of key cloning tools & door lock picks. To prevent this from happening, we are now offering the autowatch ghost installation birmingham Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys were cloned or your vehicle has been stolen.

It connects directly to your car's ECU (Engine Control Unit) through the data loop called CAN. It's completely quiet since it doesn't utilize radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects against adding a new key or replacing the ECU to get around the system as only the correct PIN code will allow the engine to start.

The device is hidden in your car and is accessible via buttons on your steering wheel, centre console, and door panels. A unique & changeable PIN code sequence up to 20 digits needs to be entered before you can start your vehicle.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car from being driven away or started in the event that a PIN code hasn't been entered first. If the device is activated and you try to drive off it will display an indication on your dash which will flash continuously for about 300m. If you type in your PIN code at this point, it will disarm the anti-hijack device and your car will continue to drive as normal. If you do not enter your PIN at this point, the indicator will continue to flash and require a new PIN each time you attempt to start your car.