• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They don't decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However when you have double-pane windows that are secured by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers that will help the new pane to fit perfectly into the frame of the window.

If you are going to attempt to remove the glass panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall on the fabric instead of landing on the floor where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. It's important to take action immediately if you notice your upvc Window repair windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll need open the window so that you can get to the frame. With a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and do an experiment fitting. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, old caulking might need to be removed. It is essential to remember that when it comes to upvc window repair window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and that the sill pan is properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in the breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It is essentially a very simple process, but it's simpler if you have someone to help you hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The issue can be caused either by opening the window improperly or by a poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be pleased to offer you advice.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, causing a gap where the sash meets frame. If they're beyond repair, it might be necessary to have them realigned. The interlock may be disaligned. It is located on the hinge side and may need to be cleaned. In some cases it might be necessary to replace them.

The next common reason for draughts is window seals, these are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc window, it's best to consult an expert as soon as possible.