• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need find some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they could be trodden under and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the distance between the window repair and the door is significant, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it can be due to the handle mechanism getting worn out. It's relatively easy to repair a loose upvc window repair handle. First, Upvc window repair you'll need to close your window and do an initial test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes have no debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with an ease. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like all mechanical parts hinges will be damaged over time. Changing a window hinge is essentially a simple process, but it's simpler when you have a person to help you hold the frame in place.

Check that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to give assistance.

It is also essential to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also reduce the risk of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also be misaligned due to wear, creating a gap where the sash and frame meet. This can be easily repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to get them realigned or replaced. In addition, the interlock could be unbalanced. This is located on the hinge's side and could require to be cleaned. In some instances it might be necessary to replace these.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will provide excellent security and insulation for your home. It is important to remember that all windows will eventually wear out and it is more cost-effective to simply replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.