• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Fix a Loose Door Hinge

The majority of homeowners can Fix door Hinge hinges that are loose. If, however, the holes for screws are smashed and won't hold screws you might have to add wood glue and dowels before you can reinstall the hinge.

Clean up any surface rust. This will help the dowels remain in place and provide them a solid foundation to grip into.

Remove the Hinges

Many standard door hinges are removable, which makes it easier to move the door from one side to the other or take the entire door off the frame if need be. Anyone who is patient can remove the hinges, but you must be aware of what to do.

If the hinges have been painted, you'll need to remove it before you attempt to remove the pins. It is possible to scratch your door if you do not remove the paint. To break the paint seal put the hinges in an stainless steel pan and fill the pan with water until the hinges are fully submerged. Let the hinges rest in the pan for about 30 minutes. The heat from the water will soften the paint, making it easier to take off.

Once the pins are loose, remove the hinges and the frame from the door. It is possible to use a regular screwdriver, but it is recommended to use a magnetic screwdriver for this task. This type of screwdriver was designed to grab screws made of steel and will make the project speed up.

Before you attempt to remove the hinges it is a good idea to spray them with a lubricant. A simple lubricant can help you to speed up the process and also remove the pins and screws more easily. This kind of lubricant is able to be found at most hardware stores as well as home improvement shops.

The number of window hinges replacement required will also vary depending on what type of door you have and the way it's installed. Heavier doors and solid-core doors will require more hinges while hollow-core doors that weigh less might only require two or three.

It is also important to know the various types of hinges so you can decide which one will work best in your situation. The hinges on the exterior are designed to support the weight of the door however, interior casement windows hinges will require to handle heavier loads.

Reattaching the Hinges

Over time the hinges on doors can lose its grip and then begin to slide or hang crookedly. This can be a major issue, but the solution is usually easy. A simple tightening can solve the problem. However when the screw holes have been stripped out, this can be more difficult. A wood dowel could be used to tighten the holes again.

Start by drilling the old hole with a drill bit close to the size of the new screw (normally 3/8"). Then use a wood glue and a dowel made of wood to fill the hole. The dowel should be cut to a length that is the same as the screw to ensure a secure fit. Reinstall the screw and tighten it until you are satisfied with the tightness. If the door does not stop bind up, insert a second dowel to the gap. Repeat the procedure. Close the door slowly after each adjustment to ensure the perimeter clearances are in order.

Another option is to use the wood plug instead of a dowel. It will work just as well but might take a bit longer to set up. You can insert a piece of wood that has been whittled down to the right size. If you don't have a woodworking instrument You can use toothpicks or matchsticks made from wood.

Once you have reinstalled the new screw then use a countersink to make the hole for the head of the screw smaller so that it won't rub against the edge of the door when it is opened and closed. This will make it easier to tighten the screw after installing the hinge.

Once you've reinstalled your hinge, be sure to grease it using a dry lubricant to prevent it from getting stuck in the future. You can use products like PB Blaster and Liquid Wrench. Apply a thin layer and allow it to soak into the hinge barrel for around 15 minutes.

Refinishing the Hinges

If you're not yet ready to replace hinges, you could try a few simple fixes. Check that the screws that attach the hinge plate to both the door frame as well as the frame are tight. If they are loose, tighten the screws with a power drill or screwdriver. Be careful not to tighten your screws so much that they cause gaps at the trim joints, or worse, strip the threads.

If the problem is that the hinge plates are separating from the jamb and door hinges repair it is possible to reattach them by gluing wood glue to the back of the plates and then inserting toothpicks or wooden dowels into the holes. Dowels and toothpicks create an solid foundation for the screws, preventing the plates from shifting as you push them in. Let the glue dry before reattaching the hinge.

Another common cause of hinges that are loose is that screws are worn out or are missing. This problem can be fixed by replacing the screws. Make sure you use the correct drill bit for the size of the screw hole to avoid drilling into other parts of the jamb or hinge.

Once you've reattached the hinge close the door and look at the gap between the door and the frame. It should be about the thickness of a nickel all around or less if there's an existing gap created by a previous door that hung improperly. If the hinges were installed correctly, this shouldn't be an issue.

If the hinges still seem loose, you could add an extra thick hinge between the hinge plate's surface and the mounting surface. This will give the hinges a little more space. You can also try removing the hinge pin from the problem hinge and pounding it using a hammer to make it tighter or using an entirely new hinge pin. It is also possible to lubricate the hinges with mineral or Jojoba oil to reduce friction and help them hold their place. Lubricating your hinges regularly can aid in keeping them from becoming stiff or squeaky, and will also extend their life.

Cleaning the Hinges

The friction generated by the hinge's constant motion draws dust particles. If there is no regular cleaning or lubrication, these particles get stuck in the moving parts of a door hinge and then build up over time. As a result, the hinge becomes stiff and creaky and its appearance could be damaged quickly. Regular cleaning, lubrication, and inspection can preserve the integrity of a door's hinges and ensure their proper operation.

Check the hinges to see how much rust has formed on their surfaces. If the rust has become so severe that it has damaged the surface of the screw holes or the barrel of the upvc window hinge, you'll need to replace them. If you are able to save the hinges, clean any loose rust by using wire brush and steel wool. Then, apply a rust remover from a commercial store or a homemade solution such as lemon juice on the hinge. Allow the rust remover to remain on the hinge for several minutes to dissolve and penetrate any remaining corrosion.

If you do not want to spend the money and time replacing your hinges, simply retightening the screws can bring back the window hinge repair's functionality. It is possible, however, to add a wooden shim or dowel to the hinge if the screw holes have been stripped. Wooden dowels come in round rods of various sizes and lengths. They are available at home improvement stores, woodworking supply and craft shops, or on the internet.

You can also create a shim from a piece either plastic or metal, depending on the type of hinge you own. To make a dowel cut a piece of wood dowel or another sturdy material to the size you want. You can then dip the dowel into a glue for carpenters and then insert it into the hole that you have stripped, allowing the glue to hold the dowel in the right position.

Before you start cleaning the hinges, place down a towel or a paper towel to shield flooring and other surfaces from spills and drips that may happen. Once the area is protected and dry, clean the hinges using a soft sponge or cloth coated with a mild cleaner or vinegar to get rid of built-up dirt, grime and tarnish. A small or toothbrush can be used to access hard-to-reach areas in crevices and narrow areas.